We have updated this motor to new smaller but powerful one, please buy it from here https://www.uumotor.com/webstore/scooter-motor/slow-speed-geared-500w-800w-hub-motor

HUB10EW is a 10 inch Electric scooter/wheelchair hub motor 180w to 380w
This brushless dc geared hub motor(reversible) can be used for elder scooter, electric wheelchair, small scooter and so on.
Rated voltage 24v-36v-48v
Rated speed: 230RPM
motor diameter with tire:245mm
Motor tyre size: 10×3.0-6
This motor is available to assemble the disc brake
Net weight:5kg(with tyer), 4.3kg(without trye)
We can also make this motor in high power version, 36v or 48v 380w,Max speed 6km/h to 25km/h. The usually version is 36v 350w.

sample testing data



HUB10EW 10 inch 350w scooter hub motor

disc brake set only USD15

disc brake set only USD15

HUB10EW motor drawing

New photos:


We have a new gearless high speed 10inch motor here https://www.uumotor.com/10-inch-scooter-hub-motor-tubless-air-tyre.html


32 thoughts on “10 inch 350w brushless hub motor for scooter

  1. I have a onewheel hover board and the motor went out trying to replace the wheel motor its 36v 500 watts 10inch wheel which one do I need and do you have it

  2. I need an motor with flexible air tyre 24 v dc, without sensor direct control, With high speed and reversible should be more than 300 rpm is it possible

  3. Hi all. I’d like to know if you have a 10″brush less wheel with regeneration brakin system. It will be mounted on a scooter that runs top speed 80km/h. Would this brushless wheel help the standard engine to reach the top speed? The scooter is 80kg +80kg pilot. Looking forward to hear pricing and shipment cost to Italy.

  4. Tony,
    1. The 36V 350W version of the HUB10EW, can go reverse?
    2. If so, which controller I need for it?
    3. What do you mean by speed 6km/h to 25km/h?

  5. Hi.
    Can you send me the datasheet for this model and controller specification ?
    Because i need to check it before buying 4 pc’s.
    Also can i control the speed?

  6. Hello, I am very interested in: HUB10EW

    Do you also sell the controller?

    Can you send me any more info you have on it, including cad drawings?

    I need a speed of around 15kph… size looks good, this might be just what I need.


  7. hi! I need a 18×9.5-8 wheel with a hub motor i would also need its controller. i would also require a wheel of the same size. do you produce such wheels? if not what is the wheel you manufacture which is closest to my dimensions.

  8. I need a 8-10″ wheel with tyre 24v that will have an average speed of 3km/hr i.e. high torque and very low speed.
    Wattage should be about 250w.
    Is this possible?

  9. Hello,

    I’m interested in this kind of motor.

    Do you have any specifications of this motor . I need low rpm(5-7)km/h and high torque,
    what is the maximum torque ? Is it geared ?

  10. Hello,

    I am interested in HUB10EW hub motor.

    can you please send me a drawing of this item.

    Best regards,


  11. Hello, I might be interested in your motors for a future development project.

    What if I requested max 6 km/h, how much torque could you make?

    Regards, Alexander, OMAI Innovations.

    • Hello Alexander,

      For 6km/h speed, that power do you need? For this motor, we can make it 10km/h usually.

  12. Hello,

    I’m interested in this kind of motor.
    Can you customized this motor to higher outputs? Lets say 48v 1000-1500w.

    Thank you

  13. hello. i have a few raycool electric scooters which i wish to convert to brushless hub motors like yours.
    can this type fit easily ?
    and whats the price + shipping to israel ?

    thank you.

  14. Will this 380w 48v motor connect my control box??? Or otherwise I will need a new control box and a throttle…please let me know asap

Leave a Reply

Your email address will not be published. Required fields are marked *