100N.m 48V 150rpm geared 8 inch hub motor

Home » hub motor » wheelbarrow motor » 100N.m 48V 150rpm geared 8 inch hub motor
8 inch high torque motor
  • Model: KK8PW
  • Price: USD180
7,604 views

Motor: 8 inch PU tire 100N.m electric wheelbarrow motor
Hall sensor: YES (5 hall sensor wires)
Brake type: Disc brake or e braking
Max Torque: 100 N.M
Rated power : 600W(max 800w)
Rated voltage :24V36V/48V(default)
No-load current: <1.5A
pole pairs: 10
gear ratio: 5
Speed :6km/h
Load Weight: 500kg
motor weight with tire : about 6.65kg

12 responses to “100N.m 48V 150rpm geared 8 inch hub motor”

  1. Thank you Tony,

    Can you supply with wide tire?
    Do I lose torque if speed is 20kph?
    What is cost and how long to send 2 for prototype to London UK?
    So 8 or 81/2 1/2 inch brushless electric wheelchair motor (reversible)
    single shaft
    Electromagnetic brake (EMB).
    Voltage :24V or 36

    Thanks Roger

  2. Hello Please could you let me know what a top speed of this motor could be and if we could run it at 36v?

    Also what is the cost and minimum order shipped to London UK>

    • Hello Roger,

      We do not have MOQ request, for the speed, we can customize it for you, from 6-15km/h, usually. If you need higher speed, it is also ok.

      • Thank you Tony,

        Can you supply with wide tire?
        Do I lose torque if speed is 20kph?
        What is cost and how long to send 2 for prototype to London UK?
        So 8 or 81/2 1/2 inch brushless electric wheelchair motor (reversible)
        single shaft
        Electromagnetic brake (EMB).
        Voltage :24V or 36

        Thanks Roger

      • Hello Can you let me know cost to get 2 delivered to London UK and what the fatest tire is. We would like max speed to be 20 kph.

  3. Is this a high torque motor ? is it geared? if not can I get a high torque geared motor with EMB electronic mechanical brake.

    Thanks Fred

  4. Dear Sir;

    I have some questions?

    1) Does the tire come assembled on the motor?
    2) What is the outside diameter to the tire?
    3) What is the maximum RPM @ 24VDC?
    4) Would you send me a CAD file of this part for my SolidWorks model? (IGES file)
    5)If you’re not able to provide the digital information for this part would you send a Detail Drawing?
    6) What is the total weight of the assembly, motor and tire together?
    7) Would you allow me to get only two assemblies for my proto-type?

    Thank very much
    Tommy Raviele
    1-561-644-9794

Leave a Reply

Your email address will not be published. Required fields are marked *