2000w electric bike kit2000w electric bike kit

48v 60v 72v 1500w-2000w gearless hub motor 50-60km/h high speed

24″26″28″ and 700c wheel size are available

The 2000w electric bicycle kit includes motorized wheel, motor controller, speed throttle, power break lever, wire harness. Buy it now from here http://www.uumotor.com/store/9-2000w-electric-bike-conversion-kit-60kmh.html

1. Quiet and reliable brushless gearless hub motor

2. Motor specifications: 48v 60v 72v

3. High motor efficiency: 82%

4. Motor diameter: 245mm

5. Reinforced double wall rim and haevy duty spoke

6. Drive system has no moving chains or gears, no friction, more efficient, less chance to break

7. Brake shuts off motor automatically, saves energy, improves safety

8. Battery power level indicator

9. Durable 600D Oxford cloth carrying bag along with a zippered main compartment for battery

2000w electric bike motor
2000w electric bike motor
2000w electric bike conversion kit
UUKIT2KW_5 UUKIT2KW_6 UUKIT2KW_7
2000w electric bicycle kit controller
2000w electric bike motor drawing

Share

73 thoughts on “2000w electric bike conversion kit

  1. I have a raleigh cadent 1 w 28inch rims. is this bike able to hold a 1500w rim and how fast will it go. Also how much does it cost?

    • we sell the motor with rim, it is ok for your bike. And the max speed is 50km/h.

  2. Is this wheel available in fat tire and with “variable” voltage motor like 1000w, 2000w, 3000w or 1500w, 3000w, 5000w with volts being 48v, 60v, 72v if not can you point me in the right direction or school me in the right direction. Thank You for your time I look forward to hearing from you. …….P.S. Lower Voltages being for the Front Wheel Higher Voltages being for the back.

    • Yes, it is ok to install fat tire. for the motor power, usually we have 48v 1000w, 60v/72v 1500w, 3000w.

  3. Hi,

    I am currently writing my master thesis for a Norwegian company designing a unit that should move with at least a maximum speed of 120 km/h. They are very interest in using hub motors where stator is rotating insted of rotor. After searching the internet it seems to me that most hub motors are large in size (typically used for bicycles and cars). I would like a HUB motors which is sized to a wheel with radius in the area of 60-110mm. Is this possible to get custom made? Is it also possible to achieve 3000, 4000, 5000 rpm? The load is about 5 kg and power should be in the area of 2000W.

    Hope to hear back from you.

    Best regards,
    Leif Tore

  4. Can you ship to Canada fast and will you conclude the battery for extra cost in the same delivery

  5. Hi. I want ebike conversion kit with 28 inch wheel…thats able to push 240 lb guy on flat surface 35 mph!!! What do i need. Also what battery will i need… I need flat compact battery. Help!

  6. Hello

    I have a Switchblade Nervo and was thinking of a 2000W motor with a 72v battery
    Question 1. Do I have to reinforce the bike in someway or is it good enough ?
    Question 2. Will it hold or brake down after two months of using?
    //Herman

  7. I will like to know if you have 3000 watts,48 volts motor(not hub type),with chain drive just like your model BM481500.how much will it cost plus an appropriate controller,throttle and meter display?thanks

  8. 2000 W ?…..Perfect! How much to ship to Czech republic-EU or to Canada?

  9. Does this kit come with a disk brake rotor? What about the caliper? From the description, it sounds as if the brake in this kit is just some kind of electrical brake that only turns off the motor? Is this correct?

  10. I am looking for small supply of 500 , 1000 , 1500 , 2000w rear wheel with 7 speed and disc brakes can you forward information and price list for delivery to british channel island s ( guernsey) and may be interested in 48v 20ah lithium power packs if competitively priced .
    built one for myself and have orders to build some but looking for better standard of engineering than the ones available to me at present , many thanks Fred.

  11. I’ve got a gio bike pb710, great bike but has no real power to it. Looking for a 16′ brushless motor with around 2000W (which ill construct a battery for out of 18650’s) looking for high top speed and hill climbing capabilities.

    What am I looking for?

    Thanks a lot.

  12. Hi Seller,

    Do you have front wheel conversation for this kit plus disc brake? If yes i will get 1 immediately by the way whats the shipping cost to singapore?

    • Hello Henry,

      It only has rear wheel kit. This power is not safe to assemble in bike front wheel.

  13. 1. How does the single gear fit to the hub and can it be replaced? Is it a screw on freewheel? 2. What is the graduation in change of speed on the accelerator. 3.Do you supply batteries?

  14. I just purchased a bike kit and battery from EBK online. The bike goes 29mph top speed.

    I want something faster than that.

    any recommendations?

  15. i am interested in Model: UUKIT2KW Price USD 315

    included wheel emsambled?

    best regards

    • The main reason is that the motor is thicker. There is not much room for more gears.

  16. Hi, I am trying to convert a 21speed road bike with 700C wheels to electric.

    If I were to put together a 72v battery, would your controller handle it?

    I’m 225 pounds and I’m looking for a top speed of about 40mph.
    (I really plan on keeping it under 30mph most of the time, but I would like to have the headroom)

    Is it possible to fit more than one sproket on the hub? If not, what is the smallest sproket you can mount back there?

      • Cool, can it take an 11t freewheel?

        Also, what about the controller and battery voltage? What’s the maximum voltage it will handle? What about amperage?

        • Okay, I’ve been doing more reading and I wanted to know if it would save anything on the kit and shipping to have kit sent without the motor laced into the rim. Just include the spokes and I’ll lace it into my existing wheel.

          How many MOSFETs does the controller have? Does the motor have a temperature sensor? Is this kit compatible with the Cycle Analyst display?

  17. What’s the drop out for this motor? Can it have freewheel installed? If so, how many speed? Thanks

  18. Hi I am looking for a motor for my conversion I have a 72volt battery li-po4 and a sunwin 72volt 2500w controller my bike has a drop out of 145 mm it is a giant trance 4 from 2012 22inch frame can you help me ? Will this motor work with my set-up ? And what will it cost with shipping to UK ? Thanks

    • We can customize this kit to meet your request. The shipping cost to UK is USD150.

  19. Newbie here. 1st what is cost to ship to Westminster Colorado USA
    2nd need more info on the battery I just spent 45 minutes trying to figure out what LifePO4 could/would will/wont work. Send me to a site ebay, amazon, somewhere that I can figure out what I need to get this thing running for a 6′ 2″ 240 lb guy. thanks Kurt

    • Hello Kurt,

      The shipping cost will be USD150. For the battery, you need a 48v 20ah battery.

    • Hi Kurt I am the same size as you yes it will work I have a 36v 750w and I have used it for 4 year it does 22mph so yes a 2000w 48v should do 40mph for a range of 40 miles using a 20 amh battery hope this helps ping battery or a A123 battery

  20. how much does the 2000w wheel weigh in lbs? and can i put a wheel in front and back to increase top speed and power up hills? what battery is lightest and strongest? to run that much power?

    • The motor is about 10kg, but this motor is not suitable for front wheel, it is better to put it on rear wheel. Rear wheel drive is good for climbing. For the battery, you can find a LiFePO4 battery, which is lighter.

    • Hello Chris, the battery is not included. The shipping cost to Estonia is USD230.

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*