The kit KIT8T2 motor is hall sensorless bldc motor, very compact, only 45mm dropout size. we have 24v and 36v version versioin for sale.

The kit includes:

  1. motor(no hall sensors) 36v 350w 25km/h
  2. controller(regen braking, e-abs braking)
  3. thumb/ twist throttle/half-twist throttle
  4. thumb throttle for e braking
KIT8T2

Twist throttle version

KIT8T2_1

half-twist throttle version

 

 

KIT8T2_2

thumb throttle version

brushless dc motor controller

controller wires guide

Basic motor specification:
voltage:24V/36V
power: 180~350W
speed: 540~600rpm(20KM~25KM)

You can see the motor details here https://www.uumotor.com/dropout-size-45mm-thin-36v-350w-hall-sensorless-8-inch-hub-motor.html

Model

Share

64 thoughts on “8 inch compact motor and controller electric scooter kit

  1. Hi tony, how much is the shipping to new zealand for wheel and 24v controller only? Do you accept paypal payments? Thanks

      • And if I wish to fit the Air inflatable tyre to have a comfortable ride, is it possible on the electric hub motor?

        Thanks.

      • Hello Tony, I am checking the Trikke and I am a bit confused since also on your site you recommend TG10 hub, which one I should take the 8″ compact hub or TG 10 hub? I wish to make my time 78cs air like the Trikke freedom . That one rolls on 3 inflatable wheels. On the specs says front wheel 225×50. Thanks and best regards, Gordon

        • it really depends on the your trikke wheel size and the installation fork size for the motor, the TG10 dropout size is 110mmm.

          • Hello Tony,
            Can you please advise if the vehicle goes down hill, what the unit and controler do?
            Speed will be over 25kms/h, the system will be in battery charge state? Or there is a free mechanism to overcome this speed. Or nothing from above.

          • no. the speed may over 25km/h due to the down hill slope. you need to brake the motor when the vehicle goes down hill.

          • Hello Tony,

            Thanks for your reply, OK so speed may over 25km/h during downhill, and the motor change it’s state from taking current from the battery to operate , it will give back current acting as an alternator to charge it? Or it doesn’t has this function.

          • yes, it gives current back to battery, but only a little, not much.

      • Hello Tony,

        Are you still there?
        Please reply me back on below comments.
        I have another question, if trikke is in downhill, the maximum speed is still 20-25km or that case there is an increase by gravity pull downhill.
        Thanks in advance,
        Gordon Cassar

    • Hello Tony,

      I am checking the Trikke and I am a bit confused since also on your site you recommend TG10 hub, which one I should take the 8″ compact hub or TG 10 hub?
      I wish to make my time 78cs air like the Trikke freedom . That one rolls on 3 inflatable wheels. On the specs says front wheel 225×50.
      Thanks and best regards,
      Gordon

  2. Can you quote me a price with shipping to Oregon, USA (zip code 97068)?

    Thank you,

    Eric

  3. Hello. Please, tell me if you have any model of wheel size which is 60 mm in width ( 45 mm in the picture above ) .

    I want to upgrade my scooter Oxelo town 9EF. size of the rear frame is exactly 60mm in width.

  4. Hi. Can I fit it to the front wheel of my scooter? The front wheel is the steering wheel, so I am not too sure whether will it be damaged if I fit it there.

    How much is the shipping cost to Singapore?

  5. Hi, how much is the cheapest shipping for this set to St Petersburg, Russia, please?

    • I am not sure, but some russian customers do have their own way to ship and get cheap shipping cost.

  6. It looks like your controller is not programmable, like for top speed.
    I already have a RC car controler. May this motor be driven by such a controler?
    Thanks for help.

  7. Hello,
    Laurent from France!
    I would have a 36v 350w one! I want to use this kit on a kick scooter. Will it work? I’m 60 kg! What will be the top speed? And what will be the shipping cost to France?
    Thank you!

    • This motor top speed is designed to 25km/h. Its max load is 150kg. For the kit shipping cost is USD125 currently.

  8. Hi!
    Can you add controller’s connectors description? I’ve already buy motor and controller and want to connect it to my own throttle and so on, but don’t have a scheme.

    • I will check if we can ship to Tanzani and email you back soon.

  9. Hello, what is the max load that this can carry? Can it be used for a wheelbarrow? thanks

  10. Hello,
    I would like to know if you can sell me only the 24v 8′ motor, I already have the controller and throttle. Thank you

  11. Hi. Could you also offer this set for 2-wheel drive, i.e. two wheels, one controller, one throttle (e.g. for application in a hand cart). If yes how much would it be shipped to Switzerland or Germany? Thx!

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website