- Model: AC8WH
- Price: USD155
AC8WH is an EMB electric wheelchair motors, geared 8 inch electric wheelchair motor. The standard version is 24v 180w mono shaft version and we can also make it dual shafts version. Max speed 8km/h.
1) Motor phase cable: Yellow : U,– Green : V, Blue : W.
2) EMB Brake wires: White : “B+ “8.5-24V, Gray : “B-“. keep voltage 8.5V, rated 24v, max 30V
3)motor Hall Sensor wires: Black : hall sensors GND, Red : hall sensors 5V, Blue : Hall W, Green Hall V ,Yellow : Hall u.
The motor is ok to be made to 12v,24V,36V and 48v version, dual shaft and single shaft are both ok. The max torque of this wheelchair motor is 35N.m.
I would like to purchase 2 of these. Could you also recommend a motor controller/driver that is compatible with this as well as an Arduino Uno for programming. Could you send a quote as soon as possible. Thank you.
What would be the recommended battery size to support this?
Do you have a CAD model of this?
Hi, I like this model.
Do you have 9.5inch wheel which has same functions?
we have 10 inch electric wheelchair motor here https://www.uumotor.com/brushless-dc-single-shaft-10-inch-electric-wheelchair-motor.html
I’m using this motor with a Curtis/Wright VR2 controller and i need to know how many poles are on the AC8WH. I assume that this means the number of poles per revolution of the motor.
It is a required setting in this VR2 for commissioning.
It is 20 poles.
Model: AC8WH
Can you send me some additional information regarding this wheel please.
– What is the maximum load / wheel for the single shaft version?
– What IP class does this wheel meet?
max load 100kg each wheel,IP54.
you can use this motor https://www.uumotor.com/webstore/scooter-motor/brushless-electric-wheelbarrow-trolley-hand-truck-hub-motor or this motor https://www.uumotor.com/webstore/scooter-motor/slow-speed-geared-500w-800w-hub-motor
The e braking does not support quick stop yet.
May you send me a quote for the kit?. I’ll need hole for disk breaks.
Thanks.
Dis braking version is ok. we will email you soon for the quotation.
The max speed 6km/h is ok, you can control the speed from 0-6km/h by throttle.