- Model: YQ-9.5-D
- Price: USD145
350W-800W mono shaft motor 9.5 inch (241mm diameter) for self balancing vehicle. It is designed for segway type bikes.
You can buy it here now https://www.uumotor.com/ws/p/9-5-inch-48v-500w-high-power-geared-hub-motor/
9.548V500W
| Item: | YQ-9.5-D | Design: | Brushless |
| Voltage: | 24v-60v | Electric motors: | Brushless dc motor |
| Tire type: | Solid Rubber | Colour: | Silver |
| Structure: | Permanent Magnet | Torque: | 10-50Nm |
| Rated voltage: | 12/24/36/48/60 | Rated Power (Watts): | 200w-350w/350w-500w/500w/800w |
| Speed: | 8-30km/h | Speed (RPM): | 150-1000rpm |
| Wheel type: | Aluminium material | Scope of application: | Golf carts/Balance car/Electric Motorcycle |
| Length: | 241mm | Net Weight (Kg): | 5.7 |
| Gross Weight (kg): | 5.9 | Effectiveness: | 75-88% |
| Production: | Jiangsu China | Rim size: | 9.5 inch |
| Product Features: | Waterproof,Totally Enclosed Small volume, light weight, large torque, high efficiency, stable performance, cost-effective superior | ||
Category
Tags
4 inch hub motor 5 inch hub motor 6 inch hub motor 8 inch hub motor 8.5 inch motor 10 inch hub motor 12 inch hub motor 13 inch hub motor 14 inch hub motor 15 inch hub motor 16 inch electric bike conversion kit 16 inch hub motor 20 inch hub motor 90mm hub motor 250W electric bike conversion kit 250w motor 350w motor 500W electric bike conversion kit 500w motor 800w motor 1000W electric bike conversion kit 1000w motor 3000w scooter motor 3500w hub motor disc brake motor disc braking motor drum brake hub motor e bike motor electric motorcycle motor electric scooter motor electric scooter motor kit electric trike kit electric wheelbarrow motor electric wheelchair motor Geared motor high speed motor hub motor with encoder in wheel hub motor low speed high torque motor mono shaft motor pneumatic hub motor pu tire motor servo hub motor single shaft hub motor wheelchair motor kit
28 responses to “9.5 inch Self Balancing Segway mono shaft motor”
Is the controller supplied with the motor when purchased? If not, what is the code for the matching controller for this motor, I cant seem to find it on the site
we do not have balancing motor controller.
Hi Tony
Your comments below on the 23 of January 2016 and the 9th of August 2015 state that you have a controller but it can only control 1 motor at a time.
What controller were you referring to?
I am not asking for the balancing controls, but surely you have a controller which takes an analogue signal input and varies motor speed accordingly?
it is like this one https://www.uumotor.com/en/wp-content/uploads/2015/05/MCIA6-controller.jpg or this one https://www.uumotor.com/180w-350w-brushless-motor-controller
Can You me the Controller for this ?
Yes, but our controller can not control two motors at the same time.
Hello,
Do You have This motor in dual shafts version?
Yes.We have, please refer to this https://www.uumotor.com/20l4-9-5inch-geared-brushless-hub-motor-hall-sensorless.html
Do You have the Controller which can match with?
Yes, but we do not have controller which can control two motors at the same time.
Hey
how many pole pairs has the motor?
Thanks.
It is 10 pairs
Can you provide specs and performance curves for SW9BL? Also, do you have a larger 12 inch mono shaft version?
Hey! which type of motors are used( BLDC or DC). If these are BLDC i want to know how you guys power these motors i.e the controller circuit for BLDC motors
They are bldc motor, you need to use bldc motor controller to drive them.
Hi,
Can you provide the weight?
Do you have detailed test data with power and efficiency?
Is 20km/h the no load rpm?
Are CAD models available yet?
Will you have a pneumatic tire available in the future?
Hi,
1. do you also provide a controller to receive data from the hall sensor?
2. can you mail the data sheet for the motor wheel?
3. do you also have a controller for this hub motor?
4. what is the payload when we use 2 such wheels?
thanks
It is pity that we do not have a controller for this two motors yeat. For the two motors, the suggest load is 150kg.
Is this motor available with knobby tires?
I am sorry,we only have one tyre type currently.
Tony,
Is this 9″ 350W motor available now? If not, do you have a due date? Below are some questions about it:
– If I run it at 24VDC, what is the maximum speed? (I’d like 20kph.)
– Do you have data (or a graph) for 24VDC (especially avg and max current ratings)?
– Does it have hall sensors?
– Do you have a wiring diagram or pinout?
– Can you run it forward and backwards (with minimal backlash in the gears)?
– Do you have a 3D model available (Solidworks, IGES or STEP)?
Thanks.
– If I run it at 24VDC, what is the maximum speed? (I’d like 20kph.)
For the 20km/h, it is ok to customize it to 24V.
– Do you have data (or a graph) for 24VDC (especially avg and max current ratings)?
It has no data now.
– Does it have hall sensors?
Yes.
– Do you have a wiring diagram or pinout?
It has 8 wires, 3 phase wires, 5 hall sensors.
– Can you run it forward and backwards (with minimal backlash in the gears)?
Yes.
– Do you have a 3D model available (Solidworks, IGES or STEP)?
Not yet.
This motor will be massive production in the next month.
Will it be freewheeling?
Yes, it is freewheeling.
Bonjour,
Pour le réalisation du prototype d’un nouveau chariot de golf innovant, pouvez-vous me fournir deux roues avec moteur, similaire à votre produit Store N° 612941 en 12V le plus léger possible, avec la carte de pilotage.
Merci de me communiquer les caractéristiques détaillées et votre devis port inclus pour livraison en France.
Cordialement
Michel FARGEOT
Hi Michel,
We can make 24v motors but we do not make 12v motor.
What will be the price for the 9 inch monoshaft for segways once it arrives?
Br Malte Breiting
The sample price will be about USD135 – USD145 per motor. Bulk order price will be lower to USD115 Per motor based on 10pcs order.